|
Do it yourself
| |||
| ||||
Model: Aprilia Sr 150
Using an Allen key, undo the two bolts that secure the caliper to the brake disc. Once the brake caliper is removed, also undo the pins that hold the pads inside the caliper and take them out. Now, while you're at it, give the inside of the caliper a good clean, then push the pistons back so that the new pads you purchased, which will obviously be much thicker than the worn ones you removed, can fit in. Proceed in reverse order until fully reassembled. Tighten all bolts securely. Cheers!
Updated on 16 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Sr 150
This guide shows how to remove and replace the front brake pads on an Aprilia SR 150 scooter, following the instructions below. First, place your sco…
Sr 150
It will be possible to replace the front brake pads on the Aprilia SR 150 by unscrewing the screws that secure the brake caliper to its corresponding…
Sr 150
To replace the air filter on an Aprilia SR 150, start by opening the bolts that secure the cover near the rear wheel, just above the transmission. On…
|
How to Reset the Oil Light on a Honda PCX 160
In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
