Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Seals of the Front Fork on the Aprilia SR 50

Model: Aprilia Sr 50
Part:

Video tutorial

Today, you will see the instructions to disassemble and replace the seals and oil of the front fork on the Aprilia SR 50 scooter. First, place the scooter on a stand and begin by removing the front wheel; unscrew the screws of the plastic cover located under the handlebars, then unscrew the bolts of the steering column (disconnecting the fork from the handlebars), as shown in the video.

At this point, slide out the fork, remove the seals, and take out the stanchions to replace the oil; once the fork has been serviced, reassemble everything!


Posted on 21 February 2026 by ScegliAuto


Related tutorials

Sr 50 In this video tutorial, you will learn how to remove the front wheel and replace the tyre on the Aprilia SR 50 R scooter in simple steps. First, posi…
Sr 50 In this brief guide, we will cover the main instructions for changing the transmission oil of the Aprilia SR 50 scooter. First, place your scooter on…
Sr 50 This guide shows how to top up the engine oil on the two-stroke Aprilia SR 50. The first step is to unscrew the two screws located on the handlebar c…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos