|
Do it yourself
| |||
| ||||
Engine Oil and Oil Filter Replacement Aprilia Dorsoduro 750
Model: Aprilia Dorsoduro 750
Video tutorial
This guide describes how to replace the engine oil and oil filter on an Aprilia Dorsoduro 750. Obtain 4 litres of Motul 5100 SAE 15W50 oil and an HIFLO HF565 oil filter. Position the motorcycle on the rear stand. Start the engine, allow it to reach temperature, and then switch off. Place a container for the used oil underneath the engine. Use a ratchet and a 17 mm socket to remove the oil drain plug located under the engine. Allow the oil to drain and clean the plug thoroughly. Use an oil filter wrench to remove the oil filter located at the bottom of the engine, front side. Screw in the new filter by hand, then tighten it a turn with the wrench. Refit the oil drain plug. Open the oil filler cap located on the right side of the crankcase. Pour in the oil, referencing the inspection hole at the bottom of the crankcase. Start the engine for one minute and switch off. Check the oil level again.
Updated on 9 March 2026 by ScegliAuto
Related tutorials
Dorsoduro 750
Today we will look at how to carry out routine maintenance by replacing the engine oil and oil filter on the Aprilia Dorsoduro 750. First, place the …
Dorsoduro 750
You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, which is located at the bottom of the bike: p…
Dorsoduro 750
To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike:…
|
How to Dismantle the Centre Fairing of the Piaggio MP3
Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |