Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short video, you will see how to remove and replace the front headlight bulb on an Aprilia SR 50 scooter. First, you will need to remove the front wheel of your scooter to access the speedometer sensor; then unscrew the screws securing the plastic cover near the forks, as illustrated in the video. At this point, extract the bulb along with its electrical cable, remove it and replace it with the new one (of the correct type); all that’s left is to connect it and reassemble everything by applying the reverse procedure!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on an Aprilia SR 50?
How to Replace the Front Brake Pads on an Aprilia SR 50?
Sr 50 This guide will show you how to remove and replace the front brake pads on an Aprilia SR 50 scooter, following the instructions below. First, place y…
How to Replace the Front Brake Pads of the Aprilia SR 50?
How to Replace the Front Brake Pads of the Aprilia SR 50?
Sr 50 To replace the front brake pads of the Aprilia SR 50, loosen the screws that secure the caliper to the disc, allowing it to be removed and the old pa…
How to Change the Oil and Seals of the Front Fork on the Aprilia SR 50
How to Change the Oil and Seals of the Front Fork on the Aprilia SR 50
Sr 50 Today, you will see the instructions to disassemble and replace the seals and oil of the front fork on the Aprilia SR 50 scooter. First, place the sc…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos