Do it yourself
| ||||
|
Model: Aprilia Shiver 750
In this guide we will see how to remove and replace the battery on an Aprilia Shiver 750 motorcycle, in simple and quick steps. First we go to remove the seat of our motorbike; therefore we find just below the battery, where we are going to disconnect the two terminals (positive and negative pole). At this point we remove the battery from its compartment and replace it with the new one, of the right type and with the same amperage; then let's reconnect the terminals again and make sure that the battery is inserted correctly inside the compartment, so that we can put the seat back!
Posted on 13 February 2024 by ScegliAuto
|
How do you replace the gear oil of the Kymco People S 200?In order to replace the gear oil of the Kymco People S 200, you need to loosen the screws that secure the transmission casing located on the rear side of the motorcycle, on the left side: by loosening the casing, you will be able to locate the drain plug underneath. This way, the plug can be loosened and it will be possible to collect all the used oil inside a properly positioned container. Once all the oil has drained out, you can pour in the new oil through the vent located slightly above the drain plug, so that the necessary amount of oil is inserted. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |