Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads on Aprilia RSV4

Model: Aprilia Rsv4 1000
Part: Brake pads

Video tutorial

In this video tutorial, see how to remove and replace the front brake pads on an Aprilia RSV4 1000. First, lift the motorcycle with a rear stand, if possible; then, unscrew the central bolt of the brake caliper to release the inner pads. At this point, pull out the old pads and replace them with new ones; remove the brake caliper, clean the inside from carbon residue, and insert the new pads.

Then, grease the caliper pins and reassemble everything, adjusting the lever travel afterwards.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Aprilia RSV4 1000?
How to Replace the Front Brake Pads on the Aprilia RSV4 1000?
Rsv4 1000 To replace the front brake pads on the Aprilia RSV4 1000, you need to loosen the screws that secure the brake caliper to the corresponding disc, so t…
How to Replace the Brake Pads on an Aprilia RSV4 1000
How to Replace the Brake Pads on an Aprilia RSV4 1000
Rsv4 1000 To replace the brake pads on an Aprilia RSV4 1000, perform the same procedure for both the front and rear wheels: loosen the screws securing the brak…
How to Replace the Brake and Clutch Levers on the Aprilia RSV4
How to Replace the Brake and Clutch Levers on the Aprilia RSV4
Rsv4 1000 Today's guide will show you the steps to remove and replace the brake and clutch levers on the Aprilia RSV4 motorcycle. First, remove the front brake…

How to Replace the Fork on the GasGas TXT 125?

To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the sides of the central axle. Once the wheel is removed, you can loosen the screws that secure the fork from the top just below the steering: at this point, it will be possible to remove it completely so that you can insert the new one, securing it properly and checking its operation.

Watch the video!


by ScegliAuto

More videos