Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on an Aprilia RSV4 1000

Model: Aprilia Rsv4 1000
Part: Brake pads

Video tutorial

To replace the brake pads on an Aprilia RSV4 1000, perform the same procedure for both the front and rear wheels: loosen the screws securing the brake caliper to its mount so that it can be detached from the discs. At this point, remove the pin inside each caliper to free the corresponding pads and take them out of their housings.

The new pads can now be inserted into the respective calipers, securing them with the appropriate screws and reattaching everything with the screws.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Aprilia RSV4 1000?
How to Replace the Front Brake Pads on the Aprilia RSV4 1000?
Rsv4 1000 To replace the front brake pads on the Aprilia RSV4 1000, you need to loosen the screws that secure the brake caliper to the corresponding disc, so t…
Replacing Front Brake Pads on Aprilia RSV4
Replacing Front Brake Pads on Aprilia RSV4
Rsv4 1000 In this video tutorial, see how to remove and replace the front brake pads on an Aprilia RSV4 1000. First, lift the motorcycle with a rear stand, if …
How to Replace the Front Brake Lever on the Aprilia RSV4 1000
How to Replace the Front Brake Lever on the Aprilia RSV4 1000
Rsv4 1000 Today's instructions will show you how to remove and replace the front brake lever on the Aprilia RSV4 1000 in simple and quick steps. First, place y…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos