|
Do it yourself
| |||
| ||||
Model: Aprilia Sr 50
To replace the air filter on the Aprilia SR 50, unscrew the screws securing the cover located on the left side of the bike, just above the transmission. Once the screws are loosened and the cover is open, you can remove the old air filter inside so it can be replaced with a new spare part. After installing the new filter, seal it in place by securing the cover with the screws removed earlier.
Updated on 24 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Sr 50
To replace the air filter on the Aprilia SR 50, loosen the screws that secure the air filter box, located on the left side of the bike near the rear …
Sr 50
Before you begin, sit on the seat of your Aprilia SR 50. Start by turning the key in the ignition switch to activate the instrument panel. Next, pres…
Sr 50
To replace the spark plug on an Aprilia SR 50, loosen the screws securing the panel located in the footwell of the bike and also fixed in the lateral…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
