Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plug on an Aprilia SR 50?

Model: Aprilia Sr 50
Part: Spark plugs

Video tutorial

To replace the spark plug on an Aprilia SR 50, loosen the screws securing the panel located in the footwell of the bike and also fixed in the lateral area of the underseat compartment. Once this panel is removed, you can access the underlying components, particularly the battery, which needs to be removed to reach the spark plug.

Extract the spark plug from its housing using a spark plug socket so that a new one can be inserted; after installation, reassemble all previously removed components.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Sr 50 In order to replace the transmission of the Aprilia SR 50, you need to loosen the screws that fix the casing to its housing, near the rear wheel on t…
Sr 50 To replace the transmission of the Aprilia SR 50, you need to loosen the screws that secure the cover located at the rear wheel, on the left side of …
Sr 50 To replace the belt on the Aprilia SR 50, first loosen all the screws securing the cover of the casing near the rear wheel. Once the casing is open, …

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos