Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Aprilia RX 125

Model: Aprilia Rx 125
Part: Exhaust muffler

This video is currently unavailable

In this guide, follow the steps to remove and replace the exhaust on the Aprilia RX 125 motorcycle. First, place the bike on a stand and start by unscrewing the fastening screws of the side fairing above the silencer to remove it. Next, unscrew the screws of the silencer bracket, then remove those located on the exhaust manifold to take off the entire exhaust, as shown in the video.

At this point, install the new exhaust by applying the reverse procedure for reassembly!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Aprilia RX 125.
How to replace the engine oil and oil filter of the Aprilia RX 125.
Rx 125 Today's instructions will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of the Aprilia RX 125 motorc…
How to Replace the Air Filter on the Aprilia RX 125
How to Replace the Air Filter on the Aprilia RX 125
Rx 125 In this short video, we will provide instructions on how to remove and replace the engine air filter on the Aprilia RX 125 motorcycle. First, remove …
How to replace the headlight bulb of the Aprilia RX 125
Rx 125 In today's video tutorial, we will see how to dismantle and replace the headlight bulb of the Aprilia RX 125. First, remove the front headlight of yo…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos