Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on an Aprilia RX 125

Model: Aprilia Rx 125
Part: Service warning light

Video tutorial

Today, we will go through the necessary steps to reset the service light for regular maintenance of the oil change on the Aprilia RX 125. First, place the bike on its stand and press and hold the button located on the right side of the dashboard; then, turn the ignition key to position one. At this point, enter the code 211 on the dashboard, permanently resetting the oil change maintenance light; then turn off the ignition and start the engine to complete the reset operation!


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Indicator on the Aprilia RX 125
Resetting the Service Indicator on the Aprilia RX 125
Rx 125 In this guide, we will briefly discover how to reset the service indicator for regular maintenance on the Aprilia RX 125 motorcycle. First, place the…
How to Reset the Service Light on the Aprilia RX 125 ABS
How to Reset the Service Light on the Aprilia RX 125 ABS
Rx 125 If you want to manually reset the maintenance light on your Aprilia RX 125 ABS but do not know how, do not worry as this guide provides all the instr…
How to Reset the Service Light on an Aprilia RX 125?
How to Reset the Service Light on an Aprilia RX 125?
Rx 125 In this tutorial, you will see how to reset the service light on an Aprilia RX 125, a very simple and quick operation to perform only after completin…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos