Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Aprilia Tuono V4 1100R?

Model: Aprilia Tuono V4 1100rr
Part: Brake pads

This video is currently unavailable

To replace the rear brake pads on the Aprilia Tuono V4 1100R, loosen the screws that secure the brake caliper to the corresponding disc: once these screws are loosened, you can completely detach the caliper from its seat, allowing it to be removed from the disc.

At this point, remove the pins that hold the pads in place so they can be extracted: you can now replace them with new spare parts, reattach the caliper to the disc, and check that everything is functioning correctly.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Aprilia Tuono V4, following the instructions below. Fi…
How to Remove the Rear Wheel of the Aprilia Tuono V4
How to Remove the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr Below are the steps to remove and replace the rear wheel and tyre of the Aprilia Tuono V4. First, place your motorcycle on a stand and lift the rear …
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
Tuono V4 1100rr The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let'…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos