Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's main steps will show us how to disassemble and replace the clutch cover of the Aprilia RSV4 1000 motorcycle. First, we put the motorcycle on the stand and start by disconnecting the clutch cable from the lever, using a wrench; then we unscrew all the fixing screws located on the side of the clutch cover, in order to detach and remove it, as shown in the video. At this point, we replace the gasket of the clutch cover and install the new cover, correctly fixing all the screws in a crisscross pattern, following the video tutorial until the end!

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Lever on the Aprilia RSV4 1000
How to Replace the Front Brake Lever on the Aprilia RSV4 1000
Rsv4 1000 Today's instructions will show you how to remove and replace the front brake lever on the Aprilia RSV4 1000 in simple and quick steps. First, place y…
How to Replace the Brake and Clutch Levers on the Aprilia RSV4
How to Replace the Brake and Clutch Levers on the Aprilia RSV4
Rsv4 1000 Today's guide will show you the steps to remove and replace the brake and clutch levers on the Aprilia RSV4 motorcycle. First, remove the front brake…
How to replace the water pump of the Aprilia RSV4 1000
How to replace the water pump of the Aprilia RSV4 1000
Rsv4 1000 In this guide, we will see the main instructions on how to disassemble and replace the water pump of the Aprilia RSV4 1000 motorcycle. First, we put …

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos