Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A2
    4. : Headlight

Audi A2 - Headlight

Headlight Audi A2 (1999-2005 / mk 1)

Audi A2 (1999-2005 / MK 1)
DIY: how to restore and polish the cloudy front headlights of the Audi A2
On the Audi A2, the video shows how to make the front headlights clear again. First, protect the area around the headlight with wide masking tape along the …Read all…
Posted on 12 May 2026 by ScegliAuto
Audi A2 (1999-2005 / MK 1)
How to Remove the Front Headlights on an Audi A2?
This tutorial shows how to remove the front headlights on an Audi A2, a very simple operation. To do this, you will only need a Torx T30 key. First, ensure the …Read all…
Posted on 7 August 2026 by ScegliAuto
Audi A2 (1999-2005 / MK 1)
How to Replace the Front Headlamp Bulb of an Audi A2
Lift the bonnet and remove the two screws securing the headlamp located on the top and side of the unit. This allows you to gently remove the headlamp for …Read all…
Posted on 6 March 2026 by ScegliAuto
Car stereo (1) Battery (4) Body (5) Key (3) Timing belt (1) Checks and maintenance (3) Throttle body (1) Headlight (3) Cabin air filter (1) Clutch (1) Window switch (1) Headlight bulb (2) Tail light bulb (1) Power window motor (1) Engine oil (1) Clock (2) Door trim panel (2) Front bumper (1) Rear bumper (1) Heater core (1) Fuse box (6) Warning light – error code (2) Service warning light (8) Fuel cap (1) Thermostat (2) Cylinder head (1)

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos