Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A2
  6. : How to replace the headlight light on the Audi A2

Audi A2 - Video tutorial

Model: Audi A2 MK 1 - Years 1999-2005
Part: Headlight
Operation: How to replace the headlight light on the Audi A2

Lift the hood and remove the two screws that lock the headlight on the top and on the side of the headlight, in this way you can remove the headlight gently and work more comfortably, remove the connector that brings electricity to the lamp, now you can open the hoods that protect the bulbs, remove them and replace them with new ones, then carry out the same operations on the headlight on the other side. Repeat the same operations in reverse to replace everything necessary in its place and be careful to respect the joints between the headlight and the car body.


Posted on 19 September 2023 by ScegliAuto



How to replace the headlight bulb on the Audi A2
Audi A2 (1999-2005 / MK 1) In today's video we will see the steps that will allow us to disassemble and replace the headlight bulb on an Audi A2. First of all we open the bonne
How to replace the headlight bulb on an Audi A2
Audi A2 (1999-2005 / MK 1) Before starting, we will have to disassemble and remove the front hood of our Audi A2. Let's start by unscrewing and removing the screws that secure
Rear light bulb replacement on Audi A2
Audi A2 (1999-2005 / MK 1) Open the boot lid and remove, by hand, the side plastic on the inside and on the side, therefore behind the headlight concerned. This will be enough

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos