Do it yourself
Frequently asked questions about cars and motorcycles

DIY: how to restore and polish the cloudy front headlights of the Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Headlight

On the Audi A2, the video shows how to make the front headlights clear again. First, protect the area around the headlight with wide masking tape along the bumper and wing edges to avoid damaging the paint during the process. Clean the A2 headlight with a spray bottle and cloth, then start wet sanding: the operator moistens the surface and repeatedly uses abrasive paper of different grits mounted on a manual pad, always keeping the plastic wet. When the opacity becomes uniform, rinse the headlight and dry it with a cloth. With the bonnet open, the products used are visible on the wing, including Meguiar's Ultimate Compound and Meguiar's Ultimate Polish: first, apply the abrasive compound to an applicator and work it by hand on the headlight to remove sanding marks, then remove the excess with a microfiber cloth. Next, apply the finishing polish in the same way to increase the clarity and shine of the headlight. At the end, remove the protective tape, and the Audi A2 headlight appears visibly clearer and more uniform, with the front cleaned and ready for use.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A2 (1999-2005 / MK 1) This tutorial shows how to remove the front headlights on an Audi A2, a very simple operation. To do this, you will only need a Torx T30 key. First, …
Audi A2 (1999-2005 / MK 1) In today's video, you will see the steps to remove and replace the headlight bulb on an Audi A2. First, open the bonnet of your car and start by unsc…
Audi A2 (1999-2005 / MK 1) Before starting, sit in the front seat of your Audi A2. Begin by prying off and removing the sun visor hook frame using a flathead screwdriver. Next,…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos