Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on an Audi A2

Model: Audi A2 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

Video tutorial

Before starting, remove the front bonnet of your Audi A2. Begin by unscrewing and removing the screws that secure the front headlight to the frame. Next, extract the headlight from its housing, then disconnect the corresponding electrical connector.

After this, rotate the base of the blown bulb anti-clockwise to extract it from its housing. At this point, disconnect the corresponding electrical connector.

Once you have disconnected the electrical connector, you can remove the bulb, and you will have completed the disassembly. To install the new bulb, follow this procedure in reverse, and the replacement will be complete.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on an Audi A2
How to Replace the Headlight Bulb on an Audi A2
Audi A2 (1999-2005 / MK 1) In today's video, you will see the steps to remove and replace the headlight bulb on an Audi A2. First, open the bonnet of your car and start by unsc…
How to Replace the Front Headlamp Bulb of an Audi A2
How to Replace the Front Headlamp Bulb of an Audi A2
Audi A2 (1999-2005 / MK 1) Lift the bonnet and remove the two screws securing the headlamp located on the top and side of the unit. This allows you to gently remove the headlam…
Replacing the Rear Headlamp Bulb on Audi A2
Replacing the Rear Headlamp Bulb on Audi A2
Audi A2 (1999-2005 / MK 1) Open the boot and detach the side plastic trim inside it, next to the rear of the affected headlamp. This will provide access to the back of the lamp…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos