Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Clock

To manually change the time displayed on the instrument cluster of your Audi A2, simply follow these steps. First, you need to obviously get inside the car and reach the driver's seat, then start the instrument cluster and locate the button below the tachometer. Immediately after, pull the button towards you and rotate it to change the hour digit. Repeat the same operation for the minute digit, and finally, pull it up one last time to save the changes.

Posted on 21 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Audi A2
How to adjust the clock of the Audi A2
Audi A2 (1999-2005 / MK 1) Today we will explain how to adjust the time and date on an Audi A2 car. To adjust the time and date, we need to turn on the car's instrument panel a…
How to Replace the Front Headlight Bulb on an Audi A2
How to Replace the Front Headlight Bulb on an Audi A2
Audi A2 (1999-2005 / MK 1) Before starting, remove the front bonnet of your Audi A2. Begin by unscrewing and removing the screws that secure the front headlight to the frame. N…
How to Reset the Service Interval on an Audi A2?
How to Reset the Service Interval on an Audi A2?
Audi A2 (1999-2005 / MK 1) Follow the instructions in the video to reset the service light on an Audi A2. Observe the dashboard of your car and locate the trip meter button sit…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos