Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Audi TT 2 located?

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Fuse box

If you own a second generation Audi TT and are curious to discover the steps you need to take to locate the car's fuses, then all you have to do is read the following guide carefully and put into practice what is described. First of all, make sure that your Audi TT is turned off, then go inside from the driver's side and leave the door open. At this point, use a flathead screwdriver to remove the plastic panel located at the end of the dashboard and, finally, locate all the various fuses you were looking for.

Posted on 5 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Audi TT located?
Where is the fuse box of the Audi TT located?
Audi Tt (2006-2014 / MK 2, 8J) Unlike other Audi models, the Audi TT has two fuse boxes inside. The first fuse box is installed in the trunk, specifically on the right side behind …
How to Locate the Fuse Boxes of the Audi TT Mk1
How to Locate the Fuse Boxes of the Audi TT Mk1
Audi Tt (1998-2006 / 8N, MK 1) This guide shows the location of the fuse boxes of the Audi TT Mk1. The fuse box that contains the fuses for the navigation and entertainment systems…
Fuse Box Diagram for the Audi TT
Fuse Box Diagram for the Audi TT
Audi Tt (1998-2006 / 8N, MK 1) This guide will show you how to locate the internal fuse box of the Audi TT and find the fuse diagram. First, open the front door and start removing …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos