Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Compressor on an Audi A4 2.0 TFSI

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air conditioning

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the air conditioning compressor on the Audi A4 2.0 TFSI. First, open the hood and start by removing the alternator belt, loosening the tensioner with a wrench; then disconnect the compressor line by unscrewing the bolt located on the top and also disconnect the electrical wiring on the side, as shown in the video.

Next, remove the compressor located under the alternator by unscrewing all the mounting bolts, and replace it with the new one!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Removing and Cleaning the Throttle Body of the Audi A4 TFSI
Removing and Cleaning the Throttle Body of the Audi A4 TFSI
Audi A4 (2007-2016 / B8) In this guide, let's see the steps to remove and clean the throttle body of the Audi A4 with a TFSI gasoline engine. First, open the hood of your car…
How to Replace the Timing Chain on the Audi A4 2.0 TFSI
How to Replace the Timing Chain on the Audi A4 2.0 TFSI
Audi A4 (2007-2016 / B8) In a few simple steps, remove and replace the timing chain on the Audi A4 2.0 TFSI. First, open the hood of the vehicle and start by removing the fro…
Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Audi A4 (2007-2016 / B8) In this guide, you will see the main steps for disassembling and replacing the camshaft of the Audi A4 2.0 TFSI. To disassemble the camshaft, you mus…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos