Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights in the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Tail light

In this tutorial we can see how to disassemble the rear lights on the Audi A3, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the two small caps on the back of the light in question and remove them. Next, unscrew the fixing nuts that have just been released using a 10mm socket wrench, grip the light and, pulling it outwards, separate it from the bodywork. At this point, all that remains is to disconnect the power connector and install any replacement.

Posted on 18 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Audi A3
How to remove the rear bumper of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Let's briefly see the instructions that will allow us to disassemble and replace the rear bumper of the Audi A3, in simple steps. First, we open the …
How to Remove the Rear Bumper of an Audi A3
How to Remove the Rear Bumper of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Remove the damaged bumper from the A3? Here’s how to take it off from the rear of the car. Open the boot, unscrew the securing bolts located at the b…
How to Remove the External Door Handle on an Audi A3
How to Remove the External Door Handle on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Before you begin, open the door of your Audi A3. Start by unclipping and removing the cover over the screws that secure the handle to the door. Then,…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos