Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the central console of the Audi A6

Model: Audi A6 C6, MK 3 - Years 2004-2012
Part: Center console tunnel

The following steps will show us how to disassemble the console and the central tunnel of the Audi A6. First, we get inside the cabin and start removing the plastic side covers of the central tunnel, by levering on the sides; then we remove the rear ventilation nozzles, unscrewing the screws we find inside, as shown in the video. At this point, we remove the armrest, unscrewing the additional screws of the central console; we detach the gear shift boot and unscrew the additional screws, removing the console and disconnecting all the electrical connectors underneath.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the central console of the Audi A6
How to disassemble the central console of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today's main steps will show us how to disassemble and replace the central console of the Audi A6, following the instructions below. First, we get in…
How to disassemble an Audi A6 center console
How to disassemble an Audi A6 center console
Audi A6 (2004-2012 / C6, MK 3) In this video tutorial we can see how you can disassemble an Audi A6 center console. We have to remove the coating on both sides; then on the driver'…
How to replace the cabin heater radiator of the Audi A6
How to replace the cabin heater radiator of the Audi A6
Audi A6 (1997-2004 / C5, MK 2) Today's steps will show us the useful directions for disassembling and replacing the heater radiator of the Audi A6's cabin. First of all, we get on …

BMW E90 E91 E92 E93: Replace Front Window Regulator

Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German automaker's vehicles. First, obtain a flathead screwdriver to remove the inner door panel. You need to take off the cover of the armrest structure that is snap-fitted. After that, you can reconnect the wiring and screw everything back in place. Finally, reinstall the panel and insert the window glass into the structure. Having someone assist you will make the process easier.

Watch the video!


by ScegliAuto

More videos