Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fog Light Bulb on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

Watch this video to learn how to replace the fog light bulb on a BMW 3 Series. Once you lift the car with a column lift and remove the wheel, prepare to take off the splash shield around the side fender of the car. Remove the plastic rivets with a metal pry tool, then unscrew the pins and the underbody of the bumper.

Now that you have access to the back of the fog light, remove the damaged bulb and install a new one (same size and voltage). Reinstall the lower panel and the splash shield under the vehicle.

Test the lights to ensure they work properly.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Replace the Right Fog Light Bulb on a BMW 3 Series E30
How to Replace the Right Fog Light Bulb on a BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) Using a medium flathead screwdriver, start by unscrewing and removing the two screws that secure the fog light to your BMW 3 Series E30. This will al…
How to Replace the Front Fog Light Bulb on a BMW 3 Series
How to Replace the Front Fog Light Bulb on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide shows you how to remove and replace the front fog light bulb on a BMW 3 Series. First, move to the front of your car and start by removing…
Remove Fog Light Bulb on BMW 3 Series
Remove Fog Light Bulb on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the fog light bulbs? Let's see how to remove the fog light bulbs on the BMW 3 Series. Turn the front wheel inward, locate the fender liner cov…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos