Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Fog Light Bulb on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fog lights

Remove the fog light bulbs? Let's see how to remove the fog light bulbs on the BMW 3 Series. Turn the front wheel inward, locate the fender liner cover. Disconnect the fender liner at the side of the front bumper: you will find the fog light bulbs; pull the bulb holders out of the fog light and extract the damaged bulbs using a screwdriver. Install the new bulbs (always the correct type and size) and insert the bulb holder into the fog light housing. After installing the bulbs, all that's left is to operate the switch. Cover the back of the fog light with the fender liner plastic.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light Bulb on a BMW 3 Series
How to Replace the Front Fog Light Bulb on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide shows you how to remove and replace the front fog light bulb on a BMW 3 Series. First, move to the front of your car and start by removing…
How to Replace the Right Fog Light Bulb on a BMW 3 Series E30
How to Replace the Right Fog Light Bulb on a BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) Using a medium flathead screwdriver, start by unscrewing and removing the two screws that secure the fog light to your BMW 3 Series E30. This will al…
How to Change the Fog Light Bulb on a BMW 3 Series
How to Change the Fog Light Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Watch this video to learn how to replace the fog light bulb on a BMW 3 Series. Once you lift the car with a column lift and remove the wheel, prepare…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos