Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat cushion of the Audi A3 8P

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Rear bench seat

See other generations:
Video tutorial

In this video we can see how to remove the rear seat of the Audi A3 8P: this system is valid for all Audis that are more or less this age. There are four clips on the base of the rear seat, one for each side. So we start by lifting the front part of the two seats in which the rear seat is divided - a metal clip that hooks onto the body - if we then push back and at the same time lift the seat, we can also detach the rear part, because it is just a small metal hook attachment.

We also remove the other part and our job is done.


Posted on 20 February 2025 by ScegliAuto


Related tutorials

How to Remove the Front Seat from an Audi A3 8L
How to Remove the Front Seat from an Audi A3 8L
Audi A3 (1996-2003 / MK 1, 8L) To remove the front seat from an Audi A3 8L, push the seat forward to access the screws securing it to the sliding rails at the rear. Once these two …
How to remove the rear seats of the Audi A3/A4
How to remove the rear seats of the Audi A3/A4
Audi A3 (2012-2019 / 8V, MK 3) Let's see how to remove the rear seats from an Audi A3 or an Audi A4: to remove the rear seat, we must first pull it out from the front edge; on each…
How to Remove the Front Seat on Audi A3
How to Remove the Front Seat on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Let’s see how to remove the front seat (passenger side) on an Audi A3? This video explains how to proceed. First, move the seat back using the electr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos