Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats of the Audi A3/A4

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Rear bench seat

Let's see how to remove the rear seats from an Audi A3 or an Audi A4: to remove the rear seat, we must first pull it out from the front edge; on each side we will find two rings that are attached to the floor of the car, and pulling them out, the seat will lift up. Once these elements are removed, you can release the backrest, to remove which a 30mm torx tip is needed, after lifting the trunk carpet and lowering the backrest of the rear seat, lift the plastic cover, and see the torx bolt between the sides of the divided rear seat. After unscrewing the bolt, we can remove the metal clip that holds it in place, and the seats can be released and lifted freely.

Posted on 22 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from Audi A3
How to Remove the Rear Seats from Audi A3
Audi A3 (2003-2013 / MK 2, 8P) The following steps will show you how to remove and replace the rear seats from an Audi A3, following the instructions below. First, open the rear do…
How to remove the rear seats of the Audi A3
How to remove the rear seats of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will see the main instructions useful for disassembling the rear seats of the Audi A3, but also of the Volkswagen Golf. First, we open the r…
How to Remove the Rear Seats of the Audi A3?
How to Remove the Rear Seats of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To remove the rear seats of the Audi A3, first extract the isofix attachments for the child seat (where present). Only then can you pull out the rear…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos