Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Audi Q2 1.4 TFSI

Model: Audi Q2 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Air filter

Video tutorial

These short and simple steps will show us how to dismantle and replace the engine air filter of the Audi Q2 1.4 TFSI. First, we open the hood of the car and start removing the upper plastic cover of the engine; then we unclip the side tabs to detach the cover of the filter box, disconnecting the air intake hose from it, as shown in the video.

At this point, we remove the air filter cartridge and replace it with the new one, inserting it in the correct direction; finally, we reassemble the filter box cover!


Posted on 4 March 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on Audi Q2
How to Replace the Air Filter on Audi Q2
Audi Q2 (2016-2024 / MK 1) In this video tutorial, see how to replace the air filter on an Audi Q2 by following some simple steps: first, purchase a new air filter; next, get i…
Where are the fuses located in the Audi Q2?
Where are the fuses located in the Audi Q2?
Audi Q2 (2016-2024 / MK 1) The fuses in the Audi Q2 are contained within dedicated fuse boxes installed in the vehicle: this type of car has two boxes for holding the fuses. Th…
Where are the Fuses in the Audi Q2?
Where are the Fuses in the Audi Q2?
Audi Q2 (2016-2024 / MK 1) Each fuse in the Audi Q2 is installed inside one of the dedicated fuse boxes present in the car: in this category of vehicle, you can identify two bo…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos