Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q2
    4. : How to replace the air filter on Audi Q2

Audi Q2 - Video tutorial

Model: Audi Q2 MK 1 - Years 2016-2024
Part: Air filter
Operation: How to replace the air filter on Audi Q2

In this video tutorial we can see how it is possible to replace the air filter on Audi Q2, following some simple steps: the first thing to do is to buy a new air filter; next step we have to get in the car and turn off the car and apply the handbrake; lift the bonnet and secure it with the special rod. With pliers we have to loosen the clamp that holds the suction pipe and then disconnect it from its seat. Remove the filter holder from its seat and unscrew the screws located in the lower part of the box, then release the tabs to open the lid of the box. Remove the old filter element and place the new air filter. Reassemble all parts in reverse order.


Posted on 13 August 2022 by ScegliAuto



Where are the fuses of the Audi Q2 located?
Audi Q2 (2016-2024 / MK 1) The fuses of the Audi Q2 are contained within the appropriate fuse boxes that are installed in the car: in this type of vehicle, it is possible to id
Where are the fuses located in the Audi Q2?
Audi Q2 (2016-2024 / MK 1) Every fuse of the Audi Q2 is installed inside one of the appropriate fuse boxes that are present in the car: in this category of vehicle, it is possi
How to replace the key battery of an Audi Q2.
Audi Q2 (2016-2024 / MK 1) In this video we will see how to replace the key battery of an Audi Q2. We take the key and turn it to the side where the Audi logo is visible; with

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos