Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of an Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Battery

To replace the battery of an Audi A3 key, start by having a new battery of the correct type, usually a CR2032. Hold the key in your hand and press the button to release the mechanical key, which is located inside the plastic part. Once extracted, you will see a small slot at the end of the key. Use a flat-head screwdriver or another small tool to gently pry and separate the two halves of the key. When the key opens, you will see the battery inside. Remove the old battery carefully, making sure not to bend or damage the metal contacts. Insert the new battery, making sure to position it with the positive pole (+) facing upwards, following the instructions inside the housing. After replacing the battery, close the key by pressing the two halves together until you hear a click confirming the closure. Finally, reposition the mechanical key in its place and check the correct operation of the remote control, making sure that the door opening and closing buttons respond normally.

Posted on 3 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) Today's guide will show you how to remove and replace the battery in the Audi A3, following the instructions below. First, open the engine bonnet of …
Audi A3 (2012-2019 / 8V, MK 3) When the malfunction message of the key appears on the instrument panel, the cause is almost always a depleted battery. In this case, simply replacin…
Audi A3 (2012-2019 / 8V, MK 3) In a few simple steps, we will see how to remove and replace the battery on an Audi A3. First, open the bonnet of the vehicle and start by removing t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos