Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Today we will explain how to replace the rear headlight bulb on an Audi A3 car. To replace the bulb, we need to open the trunk and remove the side carpet. Using a flat-head screwdriver, unscrew the headlight locking nut. Remove the headlight from its housing and open the dome light cover to replace the bulbs.

After replacing the bulbs, close the dome light cover and connect the connector to the headlight, insert the headlight into its housing and screw the nut. Place the side carpet back and close the trunk.


Posted on 19 April 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb of an Audi A3
How to Replace the Rear Light Bulb of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In this tutorial, you can see how to replace the rear light bulb of an Audi A3. Lift the boot lid, remove the plastic covers, and unscrew the interna…
How to replace the rear headlight bulb of the Audi A3
How to replace the rear headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the rear headlight bulb of an Audi A3 MK2 model car. First, open the trunk of the car and then remove the side a…
How to Replace the Rear Headlamp Bulb on a 2005 Audi A3
How to Replace the Rear Headlamp Bulb on a 2005 Audi A3
Audi A3 (2003-2013 / 8P, MK 2) If the rear headlamp bulb on your Audi A3 Mk2 (2005) is not lighting up, you need to replace it as soon as possible. Follow these steps to perform th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos