Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the four chrome Audi rims with four black rims.

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Manufacturer emblem

We can see in this video how to replace the four chrome rings, emblem of Audi, with the four black rings, a much more aggressive and modern emblem. In this specific case, it is the rear emblem, and the adhesive model, which we can find for example on Amazon with the code B09VH77NXG at a price of 66.21 euros, with free delivery. First, we verify that the size is the same as the emblem we want to remove and we mark it with bodywork tape; we heat it and then remove it starting from one side with dental floss. We remove the glue residues - in this case the youtuber used a grinder - then we clean the surface perfectly. Now, with the measurements we had taken previously, it is time to position the new emblem: We will do the same with the S3 adhesive positioned on the left side of the rear hatch.

Posted on 27 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2003-2013 / MK 2, 8P) To replace the car radio of the Audi A3, you will need to insert the four keys that secure the device inside its housing: these keys must be inserted…
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we can see how to disassemble the car radio in the Audi A3, an extremely simple and quick operation. To do this, we will need four …
Audi A3 (2003-2013 / MK 2, 8P) In order to replace the rear brake pads of the Audi A3, you need to lift the car so that the rear wheels can be removed from the corresponding hub: t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos