Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dead Battery in an Audi A4 Remote

Model: Audi A4 B9 - Years 2014-2024
Part: Key

How to replace the dead battery in an Audi A4 remote? Follow these steps: Take your remote and detach the metal part on the side. Next, press the two ends of the plastic casing (as shown in the video) and pull out the battery holder. Remove the dead battery using a small screwdriver, then take a new one of the same size and voltage. Reassemble the battery holder into the cover of your remote by pressing until it clicks into place. Attach the metal piece with the logo as shown in the video. Check that the remote works properly by pressing the buttons.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery for an Audi A4
How to Replace the Key Fob Battery for an Audi A4
Audi A4 (2000-2004 / B6) How do you replace the battery in the key fob of an Audi A4? Let's see how to do it in detail: take your remote and press the button to release the m…
How to Replace the Key Fob Battery of an Audi A4
How to Replace the Key Fob Battery of an Audi A4
Audi A4 (2014-2024 / B9) How do you replace the dead battery in the key fob of an Audi A4? Let's see in this detailed video how to do it. Take your ignition key fob and remov…
How to Change the Battery in an Audi A4 Key Fob
How to Change the Battery in an Audi A4 Key Fob
Audi A4 (2000-2004 / B6) How do you replace the battery in an Audi A4 key fob? Let's see how to do it in this video. Take your key fob and press the button to release the met…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos