Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi A3 remote control

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the RS model remote control for the Audi A3. The battery we will use is a CR 2032. Pull up the top part of the remote control to remove it and extract the emergency key stored inside. Insert the screwdriver into the remote control and with a slight outward pressure, open the remote control and remove the old battery.

After replacing the battery, close the remote control and insert the key inside. Go near the vehicle to test the functioning of the remote control.


Posted on 7 July 2025 by ScegliAuto


Related tutorials

How to replace the battery of the 2017 Audi S3 remote control
Audi A3 (2012-2019 / 8V, MK 3) To replace the battery of a 2017 Audi S3 remote control, we need to use a CR2032 model battery and a flathead screwdriver. Lift the key from the remo…
How to Replace the Key Fob Battery in an Audi A3
How to Replace the Key Fob Battery in an Audi A3
Audi A3 (2020-2026 / MK 4, 8Y) The procedure for replacing the battery in the key fob of an Audi A3 requires a few simple steps. First, extract the metal key from inside the fob: t…
Replacement of the Audi A3 key remote battery
Replacement of the Audi A3 key remote battery
Audi A3 (2012-2019 / 8V, MK 3) Today's procedure will show us how to disassemble and replace the battery of the key remote for the Audi A3, in simple steps. First, we take our remo…

    Frequently Asked Questions

    • A3 2012-2019 - The key battery light on Audi A3 comes on: what does it mean? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos