Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cigarette lighter socket of the Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cigarette lighter

See other generations:
Video tutorial

Today we discover the instructions that will allow us to disassemble and replace the cigarette lighter socket of the Audi A4, in simple steps. First, we get on board the car and start disassembling and removing the plastic cover, removing the cigarette lighter socket; disconnect the electrical wiring found underneath, in order to remove the entire cigarette lighter socket, as shown in the video.

At this point, we install the new 12V socket, making the connection; we check its operation and then all that's left is to reassemble the plastic cover of the central tunnel.


Posted on 28 July 2025 by ScegliAuto


Related tutorials

Replacement of the 12V socket fuse of the Audi A4.
Replacement of the 12V socket fuse of the Audi A4.
Audi A4 (2007-2016 / B8) In this guide, we will look at the instructions that will allow us to disassemble and replace the fuse for the 12V socket or cigarette lighter of the…
Where is the Cigarette Lighter Fuse Located in the Audi A4?
Where is the Cigarette Lighter Fuse Located in the Audi A4?
Audi A4 (2004-2008 / B7) The cigarette lighter fuse in the Audi A4 is located in the corresponding fuse box installed in the car: it is found on the side dashboard, accessibl…
Where is the cigarette lighter fuse located in the Audi A4 B7?
Where is the cigarette lighter fuse located in the Audi A4 B7?
Audi A4 (2004-2008 / B7) The cigarette lighter fuse in the Audi A4 B7 is located in the fuse compartment inside the cabin. It is a 15A fuse. To find it, open the driver's sid…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos