Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on the Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Service warning light

In this video we see how to reset the service light on an Audi A2: we need to get into the car, making sure that the doors, hood, and trunk are closed properly. On the dashboard, next to the speedometer, we will find a button. We will hold it down while turning on the dashboard, without starting the engine. On the partial odometer display, the service message will appear; we release the previously pressed button, and then press the button next to the tachometer to reset the display. The message "service in 15,000 km" will appear. We can turn off the ignition, the service is reset.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator light on the Audi A2
How to reset the service indicator light on the Audi A2
Audi A2 (1999-2005 / MK 1) Let's see how to reset the service light on an Audi A2: insert the key into the ignition without starting the engine. Below the tachometer dial, we w…
How to reset the service interval on the Audi A2?
How to reset the service interval on the Audi A2?
Audi A2 (1999-2005 / MK 1) We follow the instructions in the video to reset the service light on the Audi A2. We observe the dashboard of our car and locate the odometer button…
How do I reset the Audi A2 service warning light?
How do I reset the Audi A2 service warning light?
Audi A2 (1999-2005 / MK 1) In order to reset the Audi A2 service warning light, press and hold the button on the right of the instrument panel, immediately below the speedomete…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos