Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Reminder on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Warning light – error code

How to reset the service reminder on an Audi A4? It's a very simple operation; enter the vehicle, turn on the ignition with the appropriate key, press the button located above the medianav computer, scroll through the menu using the button above it until you find the reset option. Select the desired maintenance with the center button and confirm. Turn off the ignition after the service reset is complete and turn it back on to check the reset setting. Always remember to make changes to the vehicle's service while it is stationary and turned off.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Reminder on the Audi A4
Resetting the Service Reminder on the Audi A4
Audi A4 (2014-2024 / B9) We will briefly go over the instructions to reset the service light for routine maintenance on the Audi A4. First, get in the vehicle and turn on the…
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2014-2024 / B9) To reset the "Service" light on an Audi A4, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to access…
How to reset the service light on the Audi A4
How to reset the service light on the Audi A4
Audi A4 (2014-2024 / B9) Let's see the process of resetting the service light for the regular maintenance of the Audi A4's engine oil change. First, we get into the car and s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos