Do it yourself
Frequently asked questions about cars and motorcycles

Maintenance reset on an Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

In this very short video guide today, we are shown the entire step-by-step procedure to reset the maintenance light on an Audi A3, second series model produced starting from the year 2003. So let's start the procedure by turning on the ignition of our vehicle without starting it, then we go to pull the right button of the speedometer to display the screen related to the service interval on the information display, then release the button. After that, we pull the right button again and hold it for about five seconds to perform the reset as shown in the video, finally we restart the car.

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2003-2013 / MK 2, 8P) Want to reset the oil warning light on an Audi A3? Follow these steps to clear the warning light. Turn on the ignition (you will see the maintenance …
Audi A3 (2020-2026 / 8Y, MK 4) To reset the "Service" light on an Audi A3, turn on the instrument panel without starting the engine. Access the onboard computer through the central…
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the service light on an Audi A3 vehicle independently. The reset should be done only after performing the operatio…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos