Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the interior trim of an Audi Q3.

Model: Audi Q3 8U - Years 2011-2018
Part: Body

In this video, we will see how to remove the interior trim of an Audi Q3: specifically, the satin finishes found on the dashboard, the doors, and the center console. These are all pieces that are inserted under pressure, so to remove them, it will be sufficient to leverage with a plastic spatula to ensure that no part gets scratched, in order to lift one of the outer parts and then pull firmly but also gently; after all, these are plastic parts, and therefore prone to breaking. Special attention should be paid to the longer parts, such as the door seals and the one located above the glove compartment, while the one around the gear shift boot presents fewer difficulties.

Posted on 30 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the AdBlue warning light in the Audi Q3?
How to remove the AdBlue warning light in the Audi Q3?
Audi Q3 (2018-2025 / F3) In this tutorial, we can see how to remove the AdBlue warning light in the Audi Q3. The light activates when the pollution liquid reaches the minimum…
Where is the engine fuse box located in the Audi Q3?
Where is the engine fuse box located in the Audi Q3?
Audi Q3 (2018-2025 / F3) If you are looking for the engine fuse box of your Audi Q3, then in the following guide you will find all the instructions you need to locate it easi…
How to change the battery on the Audi Q3 key
How to change the battery on the Audi Q3 key
Audi Q3 (2018-2025 / F3) In today's video we see how to replace the remote control battery in the second series of the Audi Q3. This video is valid for many other contemporar…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos