Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Audi Q3 key remote.

Model: Audi Q3 8U - Years 2011-2018
Part: Key

Today, let's discover the steps that will allow us to disassemble and replace the battery of the Audi Q3 key remote. First, take the remote in hand and start by removing the plastic cover on the back by prying it open at the side slot. Then, remove the old battery located inside, as shown in the video. At this point, install the new battery of the correct type (in this case, a CR 2032 3V), making sure to insert it in the correct orientation. Finally, reassemble the remote and check that the buttons are functioning properly.

Posted on 5 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi Q3 key remote control.
How to replace the battery of the Audi Q3 key remote control.
Audi Q3 (2018-2025 / F3) Today's main instructions will show us the process of disassembling and replacing the battery of the key remote for the Audi Q3, as well as the Q5. F…
How to Replace the Key Fob Battery of the Audi Q3
How to Replace the Key Fob Battery of the Audi Q3
Audi Q3 (2011-2018 / 8U) In this video tutorial, you will learn how to disassemble and replace the battery of the key fob for the Audi Q3, following the instructions below. F…
Replacement of the Audi Q3 key remote battery.
Replacement of the Audi Q3 key remote battery.
Audi Q3 (2018-2025 / F3) Today's step-by-step instructions will show us how to disassemble and replace the battery of the key remote for the Audi Q3. First, we take our remot…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos