Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Audi A6 C8 located?

Model: Audi A6 C8, MK 5 - Years 2018-2026
Part: Checks and maintenance

If you want to find out where the OBD2 port is located in your Audi A6 C8, you just need to read the procedure described in the following guide and apply it step by step. First of all, get inside your Audi A6 C8 and go to the driver's seat. Then, make sure the car is completely off and shift your attention to the lower area of the dashboard, specifically on the left side of it. Finally, locate the OBD2 port you were looking for, which is usually easily recognizable due to its typical pink or fuchsia color in these car models.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of an Audi A6?
Where is and how to reach the fuse box of an Audi A6?
Audi A6 (2004-2012 / MK 3, C6) The fuse box of an Audi A6 is located under the steering column, on the driver's side. To access it, follow these steps. First of all, make sure the …
Where is the fuse box located in the Audi A6?
Where is the fuse box located in the Audi A6?
Audi A6 (2018-2026 / C8, MK 5) The Audi A6 produced from 2018 to 2022 has two fuse boxes: one is located in the engine compartment near the battery, while the other fuse box is on …
Where are the fuses located in the Audi A6?
Where are the fuses located in the Audi A6?
Audi A6 (2004-2012 / MK 3, C6) Any fuse of the Audi A6 is located inside one of the two fuse boxes that are installed in the car. In this type there are two: the first will be loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos