Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fan Resistor on Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Blower motor

See other generations:
Video tutorial

How to remove the fan resistor on Audi A4? Let's see in this video how to perform the disassembly. Remove the plastic under the glove compartment using a pry tool, then unscrew the glove compartment (where the resistor is located) with a screwdriver and take it out of the dashboard.

Disconnect the large connector of the resistor, then pull it out of the cabin. Insert a new fan resistor (connect the power connector).

Finally, reassemble the glove compartment and tighten the screws. Check the correct installation of the previously mounted parts and test their proper functioning.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) Today, you will learn, in this brief and simple guide, how to remove and replace the cooling fan on the Audi A4, following the instructions below. Fi…
Audi A4 (2007-2016 / B8) In this video, follow the instructions to remove and replace the cabin fan on the Audi A4 B8 in simple steps. First, open the glove compartment and s…
Audi A4 (2007-2016 / B8) In this guide, you will discover the main instructions on how to remove and replace the radiator fan on the Audi A4. First, open the hood of the vehi…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos