Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Headlight Leveling Sensor on the Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

This guide provides instructions to resolve the issue with the front headlight leveling sensor on the Audi A4. To access the front headlight leveling sensor, you may need to raise the vehicle, as it is located low down. The problem encountered is the breakage of the sensor rod, which we will remove and replace with a new one. By unscrewing the screws and disconnecting the electrical connector, we will remove it and install the new original one; then verify the adjustment of the front headlights' height.


Posted on 16 April 2026 by ScegliAuto


Related tutorials

Removing Fuel Level Float/Sensor Audi A4 2.0 TDI
Removing Fuel Level Float/Sensor Audi A4 2.0 TDI
Audi A4 (2004-2008 / B7) In this video tutorial, you will learn how to remove and replace the fuel level float or sensor in an Audi A4. Get inside the car and first remove th…
Guide to Installing Xenon Headlights
Guide to Installing Xenon Headlights
Audi A4 (2000-2004 / B6) This guide shows how to install an aftermarket xenon headlight kit. Provided that the installation complies with legal requirements set by traffic re…
How to know the fuse diagram of an Audi A4
How to know the fuse diagram of an Audi A4
Audi A4 (2000-2004 / B6) In this video we see how to know the functions assigned to the fuses listed in the diagram of an Audi A4 car. The first diagram shown is related to t…

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos