Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of an Aud TT

Model: Audi Tt MK 1, 8N - Years 1998-2006
Part: Tail light

How to remove the rear light of an Aud TT to replace the bulbs? Very simple operation, we see in this video how to proceed. We open the tailgate of the luggage compartment, then remove the cloth cap placed on the side trim of the luggage compartment (as in the video). We unscrew the plastic locking pins of the rear light; disconnect the power supply terminals connected to the lighthouse and pull it away from its seat. We replace damaged bulbs with new ones (same voltage) on hand. We assemble the headlight with the respective locking pins, replace the inspection cap in cloth and finally we test the correct functioning of the lights.

Posted on 15 January 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light of an Audi TT
How to remove the rear light of an Audi TT
Audi Tt (2006-2014 / 8J, MK 2) How to remove the rear light of an Audi TT? Very simple operation, we see in this video how to proceed. We open the tailgate of the luggage compartme…
Replacement of the rear headlight bulbs of the Audi TT.
Replacement of the rear headlight bulbs of the Audi TT.
Audi Tt (1998-2006 / MK 1, 8N) Below we will see the instructions that will allow us to disassemble and replace the rear headlight bulbs of the Audi TT, in simple steps. First, we …
How to remove the rear light of the Audi TT?
How to remove the rear light of the Audi TT?
Audi Tt (1998-2006 / MK 1, 8N) In case we need to replace an Audi TT rear light bulb, we can see how to proceed in the attached video tutorial. Let's start by opening the small doo…

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos