Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Battery on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Key

Below is the procedure to replace the battery in your third-generation Audi A3 key. First, you need a small flathead screwdriver and, of course, a new battery, specifically a CR2032 model. Once you have both items, take the car key and proceed to remove the rear cover using the screwdriver. Next, use the screwdriver again to easily remove the old battery and replace it with the new one. Finally, reassemble the cover.

Posted on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2020-2026 / 8Y, MK 4) Changing the remote key battery for the Audi A3 is very simple and can be done by anyone. As shown in the video, all you need is a flat tool to lever…
Audi A3 (2012-2019 / 8V, MK 3) How do you change the battery of an Audi A3 remote key? Let's see how to change the key battery. Take your remote key and use a screwdriver to pry op…
Audi A3 (1996-2003 / MK 1, 8L) Replacing the key of an Audi A3? Here’s how to disassemble the battery inside the remote key. Take your ignition key and press the button to release …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos