Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter in an Audi Q5

Model: Audi Q5 MK 2, 80A - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter in an Audi Q5, turn off the engine and open the hood. Locate the air filter box connected to the intake duct and, if necessary, disconnect the hose that limits access.

Loosen the screws securing the airbox cover and lift it enough to reach the filter element. Remove the old filter from its housing and clean the inside of the housing, removing dust, leaves, and other debris, preventing them from entering the intake duct.

Position the new filter with the correct orientation and ensure the gasket adheres evenly along the entire edge. Reposition the cover, tighten the screws, and reconnect any removed ducts.

Finally, check that all connections are secure before closing the hood.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

Where to Find the Air Filter on the 2018 Audi Q5
Where to Find the Air Filter on the 2018 Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) To correctly and independently replace the engine air filter on your 2018 Audi Q5, carefully read the instructions in this guide and follow the steps…
How to replace the engine air filter of the 2018 Audi Q5
How to replace the engine air filter of the 2018 Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In the following guide dedicated to all of you who own a second edition Audi Q5 (2018), we will describe all the steps you need to take if you intend…
How to Replace the Cabin Air Filter on an Audi Q5
How to Replace the Cabin Air Filter on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this video tutorial, you will see how to replace the cabin air filter on an Audi Q5 by following some simple steps: the first thing to do is purch…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos