Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to replace the remote control cover of the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Key
Operation: How to replace the remote control cover of the Audi A3

Over time, the buttons of the remote control key may tend or become discolored or even get punctured: it is also possible to purchase a new remote control case in the after market to which the mechanical key (blade) and the electronic circuit of the original remote control will be applied; start by removing the rear cap of the remote control which also houses the battery; at this point unscrew the small screws that hold the two remote control shells together and separate them by rotating the upper one to release the blade return spring; then move the blade and circuit into the new cover by loading the spring and then inserting the battery.


Posted on 26 November 2023 by ScegliAuto

    Frequently Asked Questions

    • A3 1996-2003 - How much does the ignition block of the 1999 Audi A3 cost? Read Answer
    • A3 2012-2019 - How to fix Audi A3 central locking problem? Read Answer
    • A3 2003-2013 - Why does the Audi A3 key not work? Read Answer
    • A3 2012-2019 - Why is the remote control of my Audi A3 not working? Read Answer
    • A3 2012-2019 - Why does the Audi A3 not open with the remote control? Read Answer
    • A3 2020-2027 - What to do if the Audi A3 remote control no longer works? Read Answer
    • A3 2012-2019 - Why doesn't the Audi A3 key open? Read Answer
    • A3 2003-2013 - Why is the ignition switch of the Audi A3 broken? Read Answer
    • A3 2012-2019 - The key battery light on Audi A3 comes on: what does it mean? Read Answer
    • A3 2003-2013 - How much is the contact breaker of the Audi A3? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos