Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the ceiling light on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Interior dome light bulb

Let's see in this video how to remove the ceiling light of an Audi A4. With a screwdriver we go to pry between the ceiling light and the transparent verino (without breaking anything), we take it out of the panel anyway. Unscrew the tightening screws located inside the ceiling light and disconnect the power supply terminal. We replace the damaged bulb with a new one (same size and voltage). We mount the ceiling light in its housing with the screws (we push the transparent plastic with our hands until the tabs are completely locked). We test the correct functioning of the ceiling lights.

Posted on 28 March 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the roof lining of an Audi A4
How to replace the roof lining of an Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to replace the roof lining of an Audi A4 car. We start by removing the interior light, using a flat-tip screwdriver to remo…
How to disassemble the interior light fixture of the Audi A4
How to disassemble the interior light fixture of the Audi A4
Audi A4 (2004-2008 / B7) This short and simple guide will show us the process of disassembling and replacing the ceiling light fixture and its bulbs in the Audi A4. First, we…
How to remove the rear dome light of the Audi A4
How to remove the rear dome light of the Audi A4
Audi A4 (2007-2016 / B8) To remove the dome light of an Audi A4 model 8b vehicle, we need to use only one tool, a simple plastic lever. We insert the lever into the sides of …

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos