Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : Tire removal on Audi Q5

Audi Q5 - Video tutorial

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Wheel
Operation: Tire removal on Audi Q5

Have we never changed the wheel on our Audi Q5? We don't even know where it is? Let's see, open the trunk and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench (if present), telescopic wrench, spare wheel. We position the jack under the grip point of the car (under the most rigid part of the frame), lift the car a little and loosen the wheel pins. We lift the car with the jack lever, unscrew the pins. Always remember to put the mounting kit in the trunk after we have finished mounting the wheel.


Posted on 28 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos