Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Battery

Is the battery of your Audi A3 due for replacement? Learn how to replace the battery. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, releasing the locking lever with your fingers, and secure it. Once the engine compartment is open, you will find the battery at the top left; remove the securing bolts of the battery terminals. Take out the battery from the engine compartment and replace it with a new one (same voltage). Close the bonnet after maintenance. Start the vehicle.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Audi A3
How to replace the battery in the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today's guide will show you how to remove and replace the battery in the Audi A3, following the instructions below. First, open the engine bonnet of …
How to replace the battery of the Audi A3 key
Audi A3 (2012-2019 / 8V, MK 3) When the malfunction message of the key appears on the instrument panel, the cause is almost always a depleted battery. In this case, simply replacin…
How to Replace the Battery on an Audi A3
How to Replace the Battery on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In a few simple steps, we will see how to remove and replace the battery on an Audi A3. First, open the bonnet of the vehicle and start by removing t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos