Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear light of an Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Tail light

Replacing the damaged headlight on Audi a4? How to take it apart? Let's take apart the broken headlight and put on a new one. We lift the trunk lid, remove the plastic cap. Unscrew the tightening screw on the side with a screwdriver. We detach the rear light from its housing once unhooked, disconnect the power supply terminals. If the bulbs are damaged, replace them with new ones (size and voltage are the same). We mount the lighthouse with attached screws and reconnect the power supply terminals. We press and screw the headlight into the rear. We close with the plastic cap.

Posted on 23 May 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…
How to remove the headlight of an Audi A4
How to remove the headlight of an Audi A4
Audi A4 (2004-2008 / B7) Before we can begin, we will have to go and open the front hood of our Audi A4. So let's start by unscrewing and removing the screws that secure the …
How to remove the rear light of the Audi A4 B6.
How to remove the rear light of the Audi A4 B6.
Audi A4 (2000-2004 / B6) In the following guide, we will discover together how to correctly disassemble the rear light of your Audi A4 B6. First of all, you must turn off the…

How to Reset the Oil Maintenance Service on a Fiat 500X

In this video, learn how to reset the oil maintenance service on a Fiat 500X. This is a very simple operation. Enter the vehicle and turn on the instrument cluster using the button next to the steering wheel. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the instrument cluster, then turn it back on and wait for it to illuminate. Finally, check the changes made to the car. Always remember to make adjustments to the onboard computer with the engine off.

Watch the video!


by ScegliAuto

More videos